UPVC Replacement Door Handles

Over time, the handles on your doors will wear down and require replacement. In this case, it is essential that the new handles match the dimensions of the previous handle.

The top screw's location as well as the lever and keyhole sizes are the three measurements you need to check. Use the size guide to assistance with this.

Inline Lever/Lever

A lever or lever patio door handle locks handle is a contemporary handle that can be used on replacement handles for upvc windows or new doors. This kind of handle is available in many designs and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles of uPVC/Composite are made of robust materials and are suitable for multi-point lock doors that require a heavy duty design. The handles are inline and use the same spindle and screws to fix them. They are easily fitted on new or existing uPVC/Composite door.

The handle can be placed and angled to suit the needs of all users. The handle has been tested to 200,000 cycles, which allows for the assurance of the quality of the finish and the performance of the handle over time. The sprung lever is adjustable to fit a broad range of locks. This is particularly useful in doors with smaller door frames in which the cylinder is further back. A shortened lever is also an excellent option for doors where the latch could be opened by a thumb turn located on the inside.

Lever Pad

The lever pad upvc handle is different from the lever handles found on most doors. These handles can work off one single spindle (inline) or independently from each side using two inline or offset spindles (pad). They are typically utilized on UPVC doors with double glazing door handles glazing. They come in a variety of finishes and variations.

The handles have been tested to the minimum of 200k cycles and are available in various finishes including White, Silver, Chrome & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high level of durability and performance for the intended use.

All of the UPVC lever pad styles for handles come with a spindle and screws which allow them to be put on an existing or new uPVC bifold door handles. The backplate fixation centres of 211mm allow for a bigger handle, which is often beneficial when replacing an old or damaged multi-point door lock mechanism. The levers for these handles have a spring, which solves the issue of door handles that sag out of their horizontal position when not being used.

When selecting the replacement UPVC aluminium window handle and spindle it is important to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement may also be called 'handle centre' or cylinder centres'. It is important for matching the correct handles.

After you have determined the correct PZ size and the correct PZ size, you must ensure that the push and lever pads are designed to match the American with Disabilities Act compliant handles you require for your door. They are typically square or round with an internal lever, and an external push pad.

The majority of UPVC Lever Pads that we sell are sprung. This means they will return to a horizontal position when not being used instead of hanging, and possibly securing to the frame. This prevents draughts from entering the home. It is also the case that the majority of UPVC lever pad handles are swivel, allowing you to install them on either side of the door.

Euro Cylinder

Cylinder locks are usually used on uPVC doors, but can also be used on other types of doors. They work by using a key that unlock a cylinder case that will reveal pins that can be aligned with those in the lock body and allowing them to turn the cam, thereby opening the door. Euro Cylinders are available with up to six pins. Doors that are internal and external require different levels of security.

Selecting the right cylinder for your needs is crucial; it depends on how your doors and handles are utilized. Doors that are external, for instance, should be fitted with cylinders with greater security while internal doors can be secured with an ordinary cylinder. Certain cylinders come with extra features that increase security, like anti-drill or anti bump properties.

A euro cylinder needs to be measured accurately to ensure that it is the correct size for your door. The cylinder needs to be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn if there is one. It is recommended to do this while the lock is in place, but if this is not possible, you can remove it to take measurements. A cylinder that protrudes beyond the handle and escutcheon might be susceptible to attacks like lock snapping, so it is important that it's not too long.

The design of the latest cylinders has anti-drilling and bump resistance features. These are designed to reduce the chance of attack by forcing cylinders to turn in a new direction. This will help to stop the attack and protect your doors.

Certain cylinders are constructed to withstand snapping. This is a more frequent kind of attack on cylinders where the break line inside the lock is attacked using a special tool to snap off the front of the cylinder to allow the door to be opened. This is much quicker and less difficult than opening the door with a multipoint lock and leaves no evidence of a break-in which can impede an insurance claim.

Spring Cassette

This spring cassette is located inside the base plate of the door handle. It is a spring-loaded solution to bring your multipoint lock handles to their resting position after use. The handles were previously equipped with no spring and would drop when the locking mechanism was disconnected. Adding this simple component is one of the most effective ways to fix this, and is an effective way to keep your doors made of upvc from getting stuck in the open or closed position, as these aren't always easy to manually close by hand.

These spring cassettes have been specifically designed to be used with sprung multipoint locks They will not work with unsprung multipoint handles and you will require a bespoke hole cut into your backplate in order for them to fit (please see image for technical diagram). They are a replacement for existing damaged or missing cassettes inside the backplates of door handles of many kinds of uPVC doors. They are fitted with a square cut out which allows for an 8mm spindle to be used and are available in a variety of.

These spring cassettes provide an excellent value solution for the issue of door handles that are sagging. These spring cassettes are easy to install and will increase the life of your uPVC door. Contact us for more information about our range of uPVC accessories and spares. We are on hand to assist you and give you expert advice.